COMPACT and PORTABLEE
Using the latest inverter technology means that the controller weight is less than half that of many other conventional CD welding machines making the equipment easily portable.

IMPROVED WELDING RESULTS
Large capacitors result in a slow discharge and improved arc melt leading to better weld strength, improved reverse marking and reduced weld spatter.

REDUCED NOISE
The softer nature of the discharge action generates less noise. Fitting a nose cone rather than the standard tripod leg assembly will reduce noise even further.

ACCURATE & EASY ADJUSTMENT
Digital displays allow for accurate monitoring of all functions. A stabilized circuit maintains voltage irrespective of input fluctuations.

INTELLIGENT CONTROLLER
The controller can automatically sense and adjust for varying voltages from 100 - 250 volts AC and for different mains frequencies from 50 - 100Hz. It can also sense and adjust accordingly for hand tools on stud or shroud ignition.
 
QUALITY & RELIABILITY
The CD200 controllers have a strong, robust construction comprising of an aluminium cage within an outer steel case. Recessed front and rear panels protect the dials and plugs. The use of soak tested components ensure maximum durability and a long working life.

INCREASED PROFITS
The rapid welding action substantially reduces the weld time. There is no requirement for a transformer thus a large fan is not required to disperse heat.
A dramatic improvement in dust ingress reduces problems with electronic failure caused by tracking and overheating.

TESTED TO THE HIGHEST LEVEL
The EU issues a directive that all Arc Welding Equipment must be certified to the product standard for electromagnetic compatibility. Using a N.A.M.A.S. accredited test house, the CD200 has undergone the highest level of testing to ensure all requirements are met. Every equipment has it own EC Declaration of Conformity and has full CE marking.

SAFETY AND PROTECTION
Two independent circuits prevent unintentional firing. One circuit senses the absence of resistance between the stud and work piece whilst the other circuit requires the nose cone tripod legs or the stud to be in electrical contact. The equipment will failsafe in the unlikely event of a component failure.

Model	CD200 / 66	CD200 / 66	CD200 / 99	CD200 / 99	CD200 / 132	CD200 / 132
Variant	Contact	Lift Gap	Contact	Lift Gap	Contact	Lift Gap
Nominal Capacitance	66,000mf	66,000mf	99,000mf	99,000mf	132,000mf	132,000mf
Weld Range – Mild Steel	2-8mm	2-6mm	2-10mm	2-8mm	2-10mm	2-10mm
Weld Range – Stainless Steel	2-6mm	2-6mm	2-8mm	2-6mm	2-10mm	2-10mm
Weld Range – Al.Alloy	2-6mm	2-8mm	2-8mm	2-8mm	2-6mm	2-8mm
Weld Range - Zintec	2-6mm	2-6mm	2-8mm	2-8mm	2-8mm	2-8mm
Weight – controller only	10.6kg	10.8kg	11.6kg	11.8kg	12.7kg	12.9kg

 

System CD 200 Technical Data
Mains Input Voltage	100 - 250V AC
Mains Frequency	50 - 100Hz
Phase	1
Input Power	500 VA
Input Fuse Rating	3.15A
Power Source	Electrolytic Capacitors
Output Voltage	25 - 200 V DC
Enclosure	-
Protection Class	IP 31
Overall Size (L x W x H inc Handle)	425 x 172 x 280mm 44/66/88 models
Overall Size (L x W x H inc Handle)	425x255x280mm 110/132 models
Safety Circuits	2
Weld Rate	from 5 to 30/minute dependent on input voltage and stud diameter

 

CD Handtools.

All CD handtools ( see menu ) are compatible with the CD 200 controller and the CDM controller and all model variations.

Download our CD200 Equipment Manual   Click Here